XSPC PURE Premix Distilled Coolant - Clear

XSPC
XSPC
10,90 €
9,81 €
Up to 10% OFF with
COOL10 code*
In stock
In stock
Ready to ship today
Item code : 15836
EAN : 5060596651395
Non-contractual photos
* Offer valid until 17/12 midnight while stocks last and cannot be combined with any other promotion in progress.
Technical details

XSPC PURE is a clean, eco-friendly coolant for PC water-cooling. It’s based on a refined 8 stage, triple distilled water blend with non-toxic corrosion inhibitors, and long life non-toxic dyes (except clear which contains no dyes).

It offers market leading protection for copper, brass, steel, nickel, aluminium and is safe to use on acetal and acrylic plastics.

PURE has an extremely low electrical conductivity and with its range of intense colours it's the perfect coolant for PC water-cooling.

Features:
- 100% Pre-mix coolant, ready to use as soon as it arrives.
- PURE 8 stage, triple distilled base.
- Superb corrosion inhibitors to protect metals such as Copper, Nickel, Brass, Steel and Aluminium tested to BS5117 and 6580:2010 standards
- Slow release long life, loop stabiliser
- Pump Friendly (non-clogging)
- Safe to use on PVC, EPDM, PETG, Acrylic and Metal Tubing
- Low electrical conductivity (<2µS/cm at 30C)
- 3 Year shelf life (unopened with seal in tact/ not in direct sunlight)
- Can be disposed via general household greywater waste
- Glycol free, Non-Toxic and RoHS Compliant

Usage Directions:
Systems containing Solder, Copper, Nickel, Brass or Steel are fine to be mixed in the same loop. PURE offers full protection.

Systems containing Aluminium MUST NOT be mixed with any other metal. PURE offers full protection for Aluminium on its own.

Classification - Regulation (EC) No. 1272/2008 (CLP)
• Physical and chemical hazards: Not classified as a physical or chemical hazard
• Human health: Not classified as a health hazard
• Environment: Not classified as an environmental hazard

Note: While this is a Distilled water product, we do not sell this as drinking water. DO NOT INGEST

Made in the UK - Safe to mix with XSPC RECOLOUR Dyes - Glycol free

 


Up to 10% discount on Watercooling by entering the code COOL10 in your basket
Offer valid until 17/12 midnight while stocks last and cannot be combined with any other promotion in progress.

Special offer

30% OFF

PETG tubes can be bent at lower temperatures than acrylic tubes and are more flexible and easier to handle.

It is mandatory to chamfer the edges of the tubes in order to avoid damage to the joints; a chamfer of 0.5mm x 45° is required.

4 pipes with a length of 91.4cm each.

Technical characteristics :

Internal diameter: 10mm (3/8 "or 9.5mm)
External diameter: 13mm (1/2 "or 12.7mm)
Material: PETG

The hose is only compatible with 1/4 "Cap fittings For 10 / 13mm Rigid Hose PRIMOCHILL Revolver SX, MONSOON EV2 and ChainGun.
It is not compatible with Alphacool fittings.