 | 
|
| 29,90 € 26,91 € |
EK-Loop Modulus Hard Tube Bending Tool - 12mm is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 12mm OD. These tools act as a mold which helps the user to form the tubing in the desired shape. These tools are made to be timeless and sturdy, as they are machined out of a solid piece of black POM acetal.
These tools come in 3 variants depending on the outer diameter (OD) of the tubing. Available models are for tube size of 12mm, 14mm, and 16mm.
Enclosed:
- EK-Loop Modulus Hard Tube Bending Tool
This extremely strong PETG tube is intended for use with adapters for external 12mm rigid pipe.
The tube must be heated to form certain curves. For experienced users only!
PETG is much harder than acrylic.
It is mandatory to chamfer the edges of the tubes by 0.5 mm x 45° in order to avoid damage to the joints.
Technical characteristics :
- Inner diameter: 8mm
- Outside diameter: 12mm
- Length: 500mm
1 pipe 500mm long.
To facilitate installation, we recommend wetting the gasket before installing the solid tube.
Facebook
Instagram
RSS News
;){kind=link}