 | 
|
Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!
Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system.
A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!
The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.
Model: 90° compression fitting 13mm
This fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 90° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility.
Technical Specifications
Dimensions
Scope of Delivery
Fitting Map
You can find an interactive map of all Alphacool fittings here.
The Alphacool HF Quick Disconnect TPV Connectors are part of the Alphacool Enterprise Solutions water cooling product range and was specially developed for the Alphacool TPV hoses. Special attention has been paid to high tensile strength and safety as this is paramount to enterprise users.
Enterprise Solutions?
Alphacool offers special water cooling products for servers and workstations in the B2B sector. In this area, great importance is attached to the strength and security of liquid cooling. Three factors were therefore particularly important for the quick-release coupling: a secure closure, high tensile strength of the assembled hoses and a particularly low weight.
The particularly high tensile strength is achieved by a claw washer located in the connection area of the hose. When the hose is mounted, this claw washer grips and holds the hose. This makes it impossible to remove the hose under normal circumstances.
Screw cap instead of click cap?
The usual quick-release fasteners work with a click closure. The Alphacool HF quick-release closure uses a solution in which the two components are screwed together. This prevents the quick release from being opened by accident or by shocks or movements.
Nylon as material?
Instead of the usual brass fittings, the Enterprise Solutions range has been specifically designed with nylon in mind. In water-cooled servers and workstations, all components must be kept easily interchangeable, so all components are usually fitted with quick-release fasteners. This means that a graphics card render server requires many quick-release fasteners. Since the structure can be very tight and the fittings can often touch the components it is important that the quick-release fasteners must not cause short circuits if they do come into contact with something sensitive. Therefore, Alphacool uses nylon as material. It is extremely light, very resistant and extremely durable.
Flow and seal
Due to an especially large opening of 9 mm throughout both the locking mechanism and the neck of the fitting the water can flow through the quick-release fastener without great resistance. Particularly in the Enterprise Solution area, where many quick-release closures are usually used within a system, too much resistance would be a massive problem for pumps. Too high a resistance would result in the need for more pumps, more pressure and therefore more application problems. Of course, this is not desired. A double seal is also used for this quick-release closure to ensure maximum tightness and safety.
Technical data:
Length: 95 mm
Diameter: 27 mm
Material: Nylon
Hose size: 12,7/7,6 mm
Color: Black
Facebook
Instagram
RSS News
;){kind=link}