Alphacool ES Mounting Kit EPYC SP5 (LGA 6096)

With this decoupling Alphacool again developed a new type of fastening the Laing pump.

It is not only an effective method of decoupling but also a very user-friendly version. With the special M4 screws, the Laing pump can now be mounted with a variety of attachments. These are easily inserted through the pump case on all four corners and bolted to the top. To tighten the screw it has a hexagon socket.

Now the Laing pump can be mounted on any arbitrary location - e.g. at the bottom of the case.
To fasten the pump you have to drill four holes in the case an use the M4 screws. 

Scope of delivery: 
4x M4 x 20mm Allen screws
4x decoupling gums with M4 x 8mm thread
4x M4 x 5mm Cross head screws
1x hex wrench