 |
Allows you to disconnect the elements of your watercooling without emptying the liquid from your circuit.
Allows among other things to drain part of the circuit without constraint.
The fitting is 100% secure thanks to its ring system, after having pulled the ring on the female fitting, the fittings separate quickly without letting the liquid escape.
HighFlow version allowing not to interrupt the flow of liquid.
Technical characteristics :
Material: chromed brass
Maximum operating pressure: 2kgf / cm2 (28.5 psi) at 25 ° C.
Maximum operating temperature: 100 ° C
Black color
Compatible Hose: 13/19
Male fitting only
Note:
In order to obtain a functional connection with an inlet and an outlet, you will need a Male connector and a Female connector from the QD3 series.
For example, it is possible to mix a 10/13 male cap with a 13 female barbed connector.
Allows you to disconnect the elements of your watercooling without emptying the liquid from your circuit.
Allows among other things to drain part of the circuit without constraint.
The connection is 100% secure thanks to its 3-point locking system.
HighFlow version allowing not to interrupt the flow of liquid.
Technical characteristics :
Color: Matte Black
Compatible Hose: 10mm internal
Compatible with all HIGH-FLOW Auto-Locking fittings
Male fitting only
The fitting is fitted with a bulkhead nut allowing it to be fixed through the wall of a box
Note:
In order to obtain a functional connection with an inlet and an outlet, you will need a Male and a Female connector.
For example, it is possible to mix a 10/13 male cap with a 13 female barbed connector.
Facebook
Instagram
RSS News
;){kind=link}