Alphacool Eiszapfen 13mm HardTube compression fitting 90° L-connector for Acryl- brass tubes (rigid or hard tubes) - knurled - deep black

The Alphacool Eiszapfen L-connector is ideally suited for connecting PETG or Acrylic HardTubes at a 90° angle.

But Why Do I Need an L-Connector?
There are two main uses for L-Connectors. Instead of needing to bend the HardTubes you can use L-connectors or other Alphacool Eiszapfen adapters for all angles. This changes the overall appearance of the water cooling system. However, there are also situations where a 90° angle is required, but the space is so narrow that it can’t actually be done with a manually bent HardTube. An Eiszapfen L-connector can be the solution here.

Double O-rings?
Like all Eiszapfen fittings, Alphacool also uses a double O-ring system for the L-connector. This ensures a snug fit compared to other systems with only one O-ring.

Material and Paintwork?
The Alphacool Eiszapfen L-connector is made completely out of brass. Alphacool relies exclusively on copper and brass products to prevent chemical reactions with other materials.  A process called ‘Chromating’ is used for the painting process. This ensures that the paint is firmly bonded to the brass and prevents the paint from flaking off.

The Alphacool Eiszapfen L-connector reflects all the features we see through the Eiszapfen fitting range. High quality and functionality, coupled with a high level of safety means you can rely on them without a second thought.

Dimension:
L x W = 34 x 34 mm