Alphacool Reservoir Clip-On 60mm - black 2 pieces

Alphacool
Alphacool
6,60 €
5,94 €
Up to 10% OFF with
COOL10 code*
In stock
In stock
Ready to ship today
Item code : 10874
EAN : 4250197151627
Non-contractual photos
* Offer valid until 17/12 midnight while stocks last and cannot be combined with any other promotion in progress.
Technical details

The best Alphacool reservoir mounts of all times!

Many reservoir mounts were designed for the original tube reservoirs from the beginning of the PC water cooling sector. During the last years though, the reservoirs became larger, sized for more capacity and metal was integrated for the end caps. This resulted in heavier reservoirs, making the construction of more sturdy mounts imperative.

With this universal mounting system every tube reservoir with an outer diameter of 50 or 60mm can be mounted safely and securely!

The design is based on hose clamps, which are able to safely seal in pressures of multiple bar with their closed-loop clamping design.

Of course a possibility for LED installation was also implemented. Two slightly pre-drilled holes in the back can be drilled as needed, and nothing stands in the way of spectacular lighting for your reservoir.


Technical specifications:
Material: Plastic
Color: Black
Inner diameter: 50mm
Mounting hole diameter: M4
LED holes (not opened): per mount 2x 5mm


Extent of delivery:
1 pair Alphacool AGB Universal mount Clip-On 60mm – black 2 pcs

Note: For mounting additional screws are needed. We recommend ordering Item No. 46023 with the mounting clips.


Up to 10% discount on Watercooling by entering the code COOL10 in your basket
Offer valid until 17/12 midnight while stocks last and cannot be combined with any other promotion in progress.

Please choose a category

Special offer

20% OFF

Alphacool's new Low Noise Edition of the Laing DDC for absolute silence! 

The Laing DDC pump is one of the best known pumps in the watercooling industry. Recently we have been working with Laing to take the DDC to the next level. The new Laing DDC310 was designed with a perfect balance of power and silence in mind. Unlike other versions with the plastic base we have revised the design with new superbly tuned brass housing which aids the pumps cooling and guarantees longer life especially when placed in areas with limited airflow.

This new housing promises a longer life of the pump. Through the cooling fins and air flow as well as an internal thermal pad attached directly to the pump board maximum cooling is achieved.

Another feature is the included decoupling option. If a pump top with a M4 threaded mounting hole, such as the Alphacool Laing DDC Acetal top is present. The special M4 screws can be screwed directly into the decoupling set and then into the case.

The pump also comes as standard with an anti-vibration mounting system . Available in black nickel and silver nickel.

This pump should be the first choice for your watercooling system.

Technical Details

  • Dimensions: 61 x 60 x 21mm
  • Color: Black nickel, black
  • Power consumption: 10W
  • Material: Brass, Stainless Steel, Aluminium oxide, hard coal
  • Maximum lifting height: 2,44m
  • Maximum system temperature: 60 ° C
  • Maximum flow: 200l / h
  • Voltage: 12V DC
  • Power connector: 4 Pin Molex
  • Tacho signal: 3-Pin Molex

Scope of delivery

  • 1x Alphacool Laing pump DDC310
  • 1x Alphacool Laing DDC bottom metal - black nickel
  • 1x Thermal
  • Decoupling
  • mounting material

Download 3D-file (.stp)

 

Datasheet

Note
Not suitable for continuous operation with liquids containing titanium dioxide or glycerine. Typically, many pastel colors use these additives.