Alphacool Eisdecke Laing DDC Plexi top V.2

Alphacool
Alphacool
29,90 €
unknow delay
Unavailable
Item code : 13519
EAN : 4250197131865
Non-contractual photos
Technical details

The tried and tested Laing DDC top has now been redesigned.

For years now again and again, only small improvements have been made. This major update differs both, visually and technically.

Revisions:
On the bottom there is space for the Laing DDC pump and in the front or on top the inlet and outlet.
For even more flexibility, the Eisdecke gets three inlets and two outlets. Another feature is the new holder keeping the entire unit a stable with great looks. Optional installation in 3.5 "drive bay is possible.
The top can be converted by using an adapter, which is given as an accessory, to an complete reservoir which has also been revised.

For all the Casemodder: In this top there are four holes for 5mm LED’s.

Technical Details:

  • Dimensions (LxWxH): 80 x 80 x 23mm
  • Material: Plexi
  • Threads: 5x ¼“

Scope of delivery:

  • 1x Alphacool Eisdecke Laing DDC Plexi Top V.2
  • 3x screw plug ¼“
  • 2x stands
  • mounting material

 

Monting manual

Note regarding mounting: After mounting a small gap remains between pump and top. The tightness is given, since the O-ring ensures a safe connection here. Therefore, do not over-tighten the screws too tightly, it can cause damage to the lid.


Up to 10% discount on Watercooling by entering the code COOL10 in your basket
Offer valid until 17/12 midnight while stocks last and cannot be combined with any other promotion in progress.

Please choose a category

Special offer

20% OFF

Alphacool's new Low Noise Edition of the Laing DDC for absolute silence! 

The Laing DDC pump is one of the best known pumps in the watercooling industry. Recently we have been working with Laing to take the DDC to the next level. The new Laing DDC310 was designed with a perfect balance of power and silence in mind. Unlike other versions with the plastic base we have revised the design with new superbly tuned brass housing which aids the pumps cooling and guarantees longer life especially when placed in areas with limited airflow.

This new housing promises a longer life of the pump. Through the cooling fins and air flow as well as an internal thermal pad attached directly to the pump board maximum cooling is achieved.

Another feature is the included decoupling option. If a pump top with a M4 threaded mounting hole, such as the Alphacool Laing DDC Acetal top is present. The special M4 screws can be screwed directly into the decoupling set and then into the case.

The pump also comes as standard with an anti-vibration mounting system . Available in black nickel and silver nickel.

This pump should be the first choice for your watercooling system.

Technical Details

  • Dimensions: 61 x 60 x 21mm
  • Color: Black nickel, black
  • Power consumption: 10W
  • Material: Brass, Stainless Steel, Aluminium oxide, hard coal
  • Maximum lifting height: 2,44m
  • Maximum system temperature: 60 ° C
  • Maximum flow: 200l / h
  • Voltage: 12V DC
  • Power connector: 4 Pin Molex
  • Tacho signal: 3-Pin Molex

Scope of delivery

  • 1x Alphacool Laing pump DDC310
  • 1x Alphacool Laing DDC bottom metal - black nickel
  • 1x Thermal
  • Decoupling
  • mounting material

Download 3D-file (.stp)

 

Datasheet

Note
Not suitable for continuous operation with liquids containing titanium dioxide or glycerine. Typically, many pastel colors use these additives.