 |
Allows you to disconnect the elements of your watercooling without emptying the liquid from your circuit.
Allows among other things to drain part of the circuit without constraint.
The fitting is 100% secure thanks to its ring system, after having pulled the ring on the female fitting, the fittings separate quickly without letting the liquid escape.
HighFlow version allowing not to interrupt the flow of liquid.
Technical characteristics :
Material: chromed brass
Maximum operating pressure: 2kgf / cm2 (28.5 psi) at 25 ° C.
Maximum operating temperature: 100 ° C
Black color
Compatible Hose: 10/13
Male fitting only
Note:
In order to obtain a functional connection with an inlet and an outlet, you will need a Male connector and a Female connector from the QD3 series.
For example, it is possible to mix a 10/13 male cap with a 13 female barbed connector.
These Monsoon Premium Chain Gun fittings are intended for watercoolers looking for an aesthetic and efficient fitting.
Its design with a round ring with six colored barrels is a tribute to the power of fire.
The high-end finish of these fittings, its design and its complete packaging make it a must for your rigid pipes.
The pipe is fixed on the fitting by sticking it in the Lock Collars already installed on the fitting (See the video below for assembly):
http://geno.boxgods.com/Hardline_Premium_Fittings.mp4
Glue is available here .
Characteristics :
Machined from marine grade brass.
Antimicrobial nickel base.
Modular - fully interchangeable - between mounting styles and tube types.
Available in 6 colors.
1/4 "thread and high quality seals
Color seals provided.
Available for 13mm and 16mm outer diameter tubes.
Delivered with :
4 fittings
4 black gaskets
4 color gaskets (depends on the color of the fitting)
4 Lock Collars
8 seals for Lock Collars
1 assembly wrench
Monsoon fittings are compatible only with the Rigid 10 / 13mm MONSOON and PRIMOCHILL hose, they are not compatible with the Alphacool hose.
Facebook
Instagram
RSS News
;){kind=link}