 | 
|
Robust high-quality nickel plated barbed fitting with cylindrical thread (G1/4"). The fitting is suitable for PVC, PU, PA, silicone and PE hoses with an inner diameter of 10mm. With integrated 1/4" Perbunan(r) O-Ring seal.
We recommend the use of hose clamps or zip ties for best possible safety!
Note for watercooling beginners:
The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
Overview:
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
These Monsoon Premium Chain Gun fittings are intended for watercoolers looking for an aesthetic and efficient fitting.
Its design with a round ring with six colored barrels is a tribute to the power of fire.
The high-end finish of these fittings, its design and its complete packaging make it a must for your rigid pipes.
The pipe is fixed on the fitting by sticking it in the Lock Collars already installed on the fitting (See the video below for assembly):
http://geno.boxgods.com/Hardline_Premium_Fittings.mp4
Glue is available here .
Characteristics :
Machined from marine grade brass.
Antimicrobial nickel base.
Modular - fully interchangeable - between mounting styles and tube types.
Available in 6 colors.
1/4 "thread and high quality seals
Color seals provided.
Available for 13mm and 16mm outer diameter tubes.
Delivered with :
4 fittings
4 black gaskets
4 color gaskets (depends on the color of the fitting)
4 Lock Collars
8 seals for Lock Collars
1 assembly wrench
Monsoon fittings are only compatible with MONSOON 13 / 16mm Rigid hose, they are not compatible with Alphacool hose.
Facebook
Instagram
RSS News
![Add to cart](javascript:AddBasket(12311,'P','10mm (3/8") fitting G1/4 with O-Ring (High-Flow) - Short - Silver', '','https://www.docmicro.com/images/products/mini/63252.v.jpg');){kind=link}