Mayhems XT-1 Nuke V2 UV Red Concentrate 250ml

Mayhems
Mayhems
21,90 €
19,71 €
Up to 10% OFF with
COOL10 code*
In stock
In stock
Ready to ship today
Item code : 14886
EAN : 5060681980713
Non-contractual photos
* Offer valid until 17/12 midnight while stocks last and cannot be combined with any other promotion in progress.
Technical details

The new “Non Toxic” high end Ethylene Glycol coolant containing a patented DeTox™ and PETG Safe additives.

250ml of Mayhems XT-1 Nuke will make 2500ml or 2.5 Ltrs of coolant (1/10 mix ratio).

  • up to 5 Year Shelf Life
  • 5 Year System Life
  • Non Toxic Ethylene Glycol (Patented Mix)
  • Pet and Human Safe
  • Biocide + (new formula for extreme cooling)
  • Corrosion + Protection 
  • Protects all metals used in current cooling systems
  • PETG Safe will not micro fracture your PETG Tubing unlike other brands.

Mayhems XT-1 Nuke is a new formulation of Non Toxic Ethylene Glycol that can be used in pressurised environments up to 390°C and down to –50 °C / -58 °F. The formulation will last over twice as long as our existing XT1 and has much more resilient biocides and inhibitors. This makes it more suitable to small form factor PC’s, all in one cooling solutions and high heat load systems utilising multiple graphic card array setups.

Mayhems very own R&D on PETG compatibility showed that all other makes of coolant based on Ethylene Glycol are not PETG Safe and cause Micro Fracturing of PETG over time. Mayhems XT-1 Nuke V2 is the only coolant based on Ethylene Glycol that has been developed from the ground up to be PETG safe.

Mayhems XT-1 Nuke is perfect for use in Co2 lasers, chillers and solar environmental systems due to its improved heat transfer characteristics including lower dynamic viscosity and higher thermal conductivity.

Mayhems XT-1 Nuke contains a new form of synergistic corrosion inhibitors to protect metals commonly found in systems e.g. aluminium, copper, brass, steel, plated water cooling blocks. Mayhems XT-1 Nuke has been independently tested and found to meet BS6580 and ASTM D1384 corrosion standards.

Mixing ratios 

Frost Protection °C / °F - *% in the system

Frost Protection °C / °F - *% in the system

- 05°C / 23°F - 10%*

- 10°C / 14°F - 22%

- 15°C / 05°F - 28%

- 20°C / -4°F - 33%

- 25°C / -13°F - 38%

- 30°C / -22°F - 42%

- 35°C / -31°F - 46%

- 40°C / -40°F - 54%

- 45°C / -49°F - 57%

- 50°C / -58°F - 60%

* This is the bare minimum mix ratio for Mayhems XT-1 Nuke to work effectively.


Up to 10% discount on Watercooling by entering the code COOL10 in your basket
Offer valid until 17/12 midnight while stocks last and cannot be combined with any other promotion in progress.

Special offer

30% OFF

The tube should be heated to form certain curves, slide the rubber wick into the tube just before heating it and remove it again when the tube is cool.
This makes it easier to bend the tube and prevent it from warping.

Technical characteristics :

- Diameter: 9.5mm
- Length: 40 cm