 | 
|
The EK-D-RGB 6-Way Splitter Cable allows users to connect up to six digitally addressable RGB products to a single D-RGB (addressable) motherboard or controller header so that they can synchronize all their D-RGB products.
It features standard 3-pin D-RGB headers and the male-male connector pins are also included in the packaging. The splitter cable can be used with any standard 3-pin 5V D-RGB controller or any of the popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header.
Please refer to the motherboard manufacturer manual or RGB controller manufacturer manual for LED type compatibility, maximum power load and maximum allowed LED strip length. For a list of EK D-RGB product power consumption, consult: https://www.ekwb.com/blog/ek-6-way-d-rgb-splitter-and-how-to-use-it/
Technical and electrical specifications:
- RGB connector classic 3-pin (5V+ R G B)
- 3-pin RGB Source header to six 3-pin RGB headers
- Maximum total cable length: 300mm +/- 5mm
- Length of split cables: 135mm +/- 5mm
- Color: Black
Content:
- EK-RGB 6-Way Splitter Cable
- 3-pin male-male connector (7pcs)
Made in China
For connection of 6 fans with 3-Pin connectors to a 3-Pin connector e.g. on the Mainboard. Please note that the speed monitoring of only one connected fan is possible with this adaptor cable.
A white sticker on one of the cables shows which connector can be monitored.
Sleeving:
This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look.
The idea behind these cables:
Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables.
Technical specifications:
Connectors: 3-Pin to 6x 3-Pin Y-cable
Colour: UV-reactive red sleeve, black connectors and black heatshrink
Dimensions: 30cm length each
Conforms with RoHS
Extent of delivery:
1x Phobya Y-cable 3-Pin Molex to 6x 3-Pin Molex 30cm - White
Please note: If connecting multiple fans to one fan connector by using these adapters please ensure that the source is specified to supply enough current to safely supply all fans together. Too high loads may result in damages to the system.
Facebook
Instagram
RSS News
;){kind=link}