EK Water Blocks EK-Pro Radiator P360 Multiport - Black

EK Water Blocks, EKWB
EK Water Blocks
141,90 €
127,71 €
Up to 10% OFF with
COOL10 code*
In stock
In stock
Ready to ship today
Item code : 15845
EAN : 3831109910078
Non-contractual photos
* Offer valid until 17/12 midnight while stocks last and cannot be combined with any other promotion in progress.
Technical details

With a thickness of 45mm, the EK-Pro P Series radiators are amazing all-rounders for low noise and high performance across the entire fan operational range. Equipped with a total of four G1/4“ threaded connection ports, it provides additional versatility during the loop planning process. A total of 14 2mm-wide copper tubes across the entire radiator length assure optimal coolant flow, putting no stress on your cooling loop. High-grade non-louvered copper fins with 18 FPI density provide the best balance between thermal transfer and air resistance, enabling optimal performance even at low-speed fan operation. To maximize cooling performance, a Push/Pull setup can be utilized on P Series EK-Pro radiators.  

The EK-Pro P series radiator maximizes performance by utilizing an enhanced core with an optimized fin structure. Unlike most other radiators on the market, EK-Pro Radiator P360 Multiport is exactly 120mm wide, which ensures compatibility with most 120mm fan mounts.

The finish of the materials, mechanical rigidity, and performance are enterprise-grade.

With the supplied screws, this radiator is compatible with 120mm fans that have a standard 25mm thickness. EK recommends using EK fans or similar ones with sealed-edge frames. This classic yet effective square shape of the fan casing provides optimal performance in either the pull (suction) or push (pressure) regime without any hydraulic losses, thus ensuring the optimal cooling capacity of your liquid cooling radiators. 

Multiport – The Choice of Ports is Yours

This multiport radiator has two additional G1/4“ threaded connection ports on the side of the radiator to allow more options with tube routing.

Standard M4 Screws

Hard-wearing black M4 Philips round-headed screws are supplied for ease of use. In general use case scenarios, EK strongly suggests using only the included screws to avoid damage to the radiator itself. However, M4 screw compatibility allows the users to source longer screws if necessary. The cooling core is designed to cause no detrimental damage to the structural integrity of the radiator core even if the customer uses longer screws accidentally, as they will collide only with the fins. 

Low Hydraulic Restriction

The internal structure design of the radiators was executed with low flow restriction in mind, providing no unnecessary stress on the rest of the cooling loop. This means you will be able to add multiple radiators to your cooling loop using only a single pump (D5 or DDC). The radiators are also airflow-friendly and low-restriction, allowing lower fan speed operation to achieve the same performance. Low airflow restriction keeps the case well-ventilated and allows other radiators in the case to breathe properly.   

Technical and Material Specifications:

- High-grade 99.9% copper fins  
- Copper H90 tubing 
- Brass H62 end tank chambers 
- Stainless Steel side plates 
- Nickel-plated brass plugs 

Dimensions: 395 x 120 x 45mm (L x W x H)
Weight: 1.15kg
FPI: 18
Port threads: 4x G1/4"  
Fan compatibility: 120x120x25mm fan
Pressure tested: 1bar  

Enclosed: 

- EK-Pro Radiator P360 Multiport - Black
- 12x Phillips Slotted M4x30mm for 25mm thick fans 
- 12x Phillips Slotted M4x5mm for mounting the radiator directly to the case 
- 6mm steel Allen (Hex) key
- 9mm steel Allen (Hex) key

 


Up to 10% discount on Watercooling by entering the code COOL10 in your basket
Offer valid until 17/12 midnight while stocks last and cannot be combined with any other promotion in progress.

Special offer

25% OFF

The EK-Pro CPU WB 4677 Rack Ni + Acetal is a dedicated enterprise-grade water block with 1U chassis compatibility specifically developed for LGA 4677 Intel® Xeon processors. The core of the new CPU water block was refined to manage the growing heat dissipation of new processors and to upgrade connectivity options for server rack requirements. The new server/workstation-grade CPU water block is compatible with 1U chassis type and suitable for use in server racks.

EK-Pro

The EK-Pro CPU WB 4677 Rack Ni + Acetal water block features a total of 4 G1/8" threaded side ports for low-profile usage.

This enterprise cooling solution is built with performance, reliability, serviceability, and no compromises in mind. This water block meets these demands with top thermal performance and unparalleled connectivity, making it the perfect choice for liquid cooling high-density computing systems.

The EK-Pro CPU WB 4677 Rack Ni + Acetal water block features a precisely machined copper base (coldplate) made from the purest copper available on the market and is treated with nickel electroplating. The top is CNC machined from durable black POM Acetal, and the hold-down bracket is made of laser-cut stainless steel.

Intel® CPU socket compatibility:
- LGA 4677 
Intel

Enclosed:
- EK-Pro CPU WB 4677 Rack Ni + Acetal Water Block
- 2x EK plug G 1/8”
- EK-Loop Multi Allen Key (6mm, 8mm, 9mm)
- 1x Torx T30 Key - 1x 5mm Allen Key
- Thermal grease (1g)