 | 
|
The EK-Classic Distroplate Front PC-O11D SPC PWM D-RGB - Plexi, is specifically designed to provide a comprehensive water cooling solution for the most popular water cooling case on the market, the Lian Li PC-O11D. It embodies the EK-Classic ideals of budget-conscious SPC pump and simplistic design, offering an affordable solution for incredible aesthetics.
This front-mounted distribution plate simplifies the water cooling build process for beginner PC builders who targeting the use of hard tubing. Using this distro plate requires little to no bending with straight runs to the waterway. It offers an all in one solution that includes a pump and reservoir while being fitted with multiple industry-standard G1/4" threaded inlet and outlets. It is able to support one CPU and up to two GPUs and a top-mounted radiator.
It is mounted on the front of the Lian Li PC-O11D case revealing the awesome aesthetics head-on. The built-in Addressable D-RGB LED strip connects to the motherboard 5V Addressable D-RGB header and it is compatible with all popular RGB sync technologies from all major motherboard manufacturers.
True to the EK Classic ideals, this water distribution plate comes with a reliable value-oriented SPC liquid cooling pump that has PWM speed control.
Technical specifications:
- Motor: Electronically commuted motor
- Rated voltage: 12V DC
- Power consumption: 6W
- Maximum pressure head: 2.2m
- Maximum flow rate: 250 L/h
- Maximum liquid temperature: 50°C
- Materials: PPS-GF30, EPDM O-rings, graphite
- Power connector: 4-Pin PWM FAN connector
- D-RGB cable length: 50cm
- D-RGB connector 3-pin 5V digital LED header (Pinout: +5V, D, Blocked, Ground)
- Reservoir volume: ~650ml
Operational regime:
- PWM duty cycle: ~ 20-100%
- Default behavior: Runs at 100% duty cycle when no PWM feedback signal is present
Enclosed:
- EK-Classic Distroplate Front PC-O11D SPC PWM D-RGB - Plexi
- PWM Extender Cable 50cm
- 1x Allen key 2mm
- 1x Allen key 2,5mm
- 1x Allen key 6,0mm
- 2x Screw M3x8 7991DIN
- 3x Screw M4x20 7991DIN
- Screw M4x20 7991DIN
Designed and engineered in Slovenia - EU!
Made in China
The Alphacool Apex Distro Plate is the visual upgrade for the Y60. It was specially designed for this case and replaces the front glass panel. A must-have for every custom water cooling system.
Apex Design
The Apex product line from Alphacool represents the highest level of perfection. First-class materials and innovative technologies guarantee a unique premium product. A core element is the chrome-plated brass G1/4" connections. In this way, Alphacool avoids the problem of possible leaks due to cracking caused by screwing the connections directly into the acrylic. The connections are in two parts, fitted with an O-ring and counter each other when installed in the acrylic.
High-quality choice of materials & brilliant lighting
Alphacool's Apex Distro Plate is made from high-quality acrylic glass. This allows a clear view of the coolant and enables brilliant illumination thanks to the built-in digitally addressable aRGB lighting. The lighting can be controlled via a digital aRGB header on the mainboard or optionally via Alphacool's Aurora Eiscontrol aRGB controller (article no.: 15360).
Easy installation
The Alphacool Apex Distro Plate Y60 replaces the front glass panel of the Y60 housing and is easy to install. It is mounted in place of the glass panel and securely fastened using the original screws. After installation, the distro plate is connected to the water cooling loop.
Note: The Apex Distro Plate Y60 is only compatible with the Y60 housing.
Attention: It is not possible to mount the Distro Plate if a 140 mm or 280 mm radiator is attached to the side.
Compatibility:
- Y60 Case
Technical data
Dimensions (L x W x H)
344,50 x 213,50 x 87,30 mm
Material
acrylic
Volume
approx. 300ml
Pump compatibility
VPP/D5
Threads
6x G1/4" + 1x fill port and 1x drain port
Maximum working temperature
60 °C
Pressure tested
0,8 Bar
Quantity digital aRGB LEDs
11
Power digital aRGB LEDs
5V
Power connection digital aRGB LEDs
3-Pin JST + 3-Pin 5V
Weight
3000g
Color
transparent
Technical data pump
Material pump
synthetic material
Material pump cover
aluminium
Material axle
ceramics
Connections
4-Pin PWM | SATA
Rotational speed
2500 - 4500 RPM
Cable lengths
4-Pin PWM - 48cm | SATA - 48cm
Operating voltage
8-13V DC / 14W IP32
Starting voltage
12V DC
Maximum pumping head
4,25m
Maximum flow rate
340L/h
Maximum working temperature
60°C
Color
black
Note on application
Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well.
Facebook
Instagram
RSS News
