 | 
|
This extremely strong PETG tube is intended for use with adapters for external 12mm rigid pipe.
The tube must be heated to form certain curves. For experienced users only!
PETG is much harder than acrylic.
It is mandatory to chamfer the edges of the tubes by 0.5 mm x 45° in order to avoid damage to the joints.
Technical characteristics :
- Inner diameter: 8mm
- Outside diameter: 12mm
- Length: 500mm
1 pipe 500mm long.
To facilitate installation, we recommend wetting the gasket before installing the solid tube.
Facebook
Instagram
RSS News
', '','https://www.docmicro.com/images/products/mini/WC_Tuyau1012.v.jpg');){kind=link}