 | 
|
PETG tubes can be bent at lower temperatures than acrylic tubes and are more flexible and easier to handle.
It is mandatory to chamfer the edges of the tubes in order to avoid damage to the joints; a chamfer of 0.5mm x 45° is required.
4 pipes with a length of 91.4cm each.
Technical characteristics :
Internal diameter: 10mm (3/8 "or 9.5mm)
External diameter: 13mm (1/2 "or 12.7mm)
Material: PETG
The hose is only compatible with 1/4 "Cap fittings For 10 / 13mm Rigid Hose PRIMOCHILL Revolver SX, MONSOON EV2 and ChainGun.
It is not compatible with Alphacool fittings.
The High Flex hose is a superior quality hose, suitable for all water cooling systems which allows a very large bending radius.
The material is made of a special polyvinyl chloride (PVC) and makes the hose extremely flexible.
Smooth internal and external surface improves water flow.
Internal diameter: 13mm (1/2 ")
External diameter: 19mm (3/4 ")
Characteristics
-
- UV reactive
- Smooth internal and external surfaces
- Ultra flexible
- No inscription on the pipe
Any order of X meters will be delivered in 1 piece of X meters
Facebook
Instagram
RSS News
;){kind=link}