 | 
|
PETG tubes can be bent at lower temperatures than acrylic tubes and are more flexible and easier to handle.
It is mandatory to chamfer the edges of the tubes in order to avoid damage to the joints; a chamfer of 0.5mm x 45° is required.
4 pipes with a length of 91.4cm each.
Technical characteristics :
Internal diameter: 10mm (3/8 "or 9.5mm)
External diameter: 13mm (1/2 "or 12.7mm)
Material: PETG
The hose is only compatible with 1/4 "Cap fittings For 10 / 13mm Rigid Hose PRIMOCHILL Revolver SX, MONSOON EV2 and ChainGun.
It is not compatible with Alphacool fittings.
Facebook
Instagram
RSS News
;){kind=link}