 | 
|
| 9,90 € 8,91 € |
The perfect solution for perfect curves in the Alphacool HardTubes is now available.
Simply slide the silicon insert into the plexiglass tube and heat up the desired section. Thanks to the extreme heat resistance of silicon, the tube can be bent without the curved section buckling. After it cools, the silicon insert can simply be pulled out.
Available for tubes with 10mm, 12mm, and now 13mm inner diameters, and each size comes in 30cm length for curves in shorter tubes or 100cm length for curves in longer tubes.
Technical Details
Scope of Delivery
Notice
Due to the manufacturing process, the diameter can vary by 0.5 - 1mm.
PETG tubes can be bent at lower temperatures than acrylic tubes and are more flexible and easier to handle.
It is mandatory to chamfer the edges of the tubes in order to avoid damage to the joints; a chamfer of 0.5mm x 45° is required.
4 pipes with a length of 91.4cm each.
Technical characteristics :
Internal diameter: 10mm (3/8 "or 9.5mm)
External diameter: 13mm (1/2 "or 12.7mm)
Material: PETG
The hose is only compatible with 1/4 "Cap fittings For 10 / 13mm Rigid Hose PRIMOCHILL Revolver SX, MONSOON EV2 and ChainGun.
It is not compatible with Alphacool fittings.
Facebook
Instagram
RSS News
![Add to cart](javascript:AddBasket(13748,'P','Silicon Bending Insert 100cm for ID 1/2" / 13mm hard tubes - blue', '','https://www.docmicro.com/images/products/mini/Alphacool_MechePETG.v.jpg');){kind=link}