![]() |





| 10,90 € 9,81 € |

Ultrapure H20 distilled water is the purest coolant developed specifically for PCs.
Its electrical conductivity is less than 2µS or about 1PPM at the source.
This fluid goes through more process than any other coolant manufacturer's fluid on the planet and you won't get any better than the H20 Ultra Pure.
Filtration steps:
80 PSI diaphragm pump
10 microns
5 micron filter
1 Micron filter
10 micron carbon filter
5 to 1 micron carbon filter
3 x RO filters
4 x DI Polishing Filters
1 Ultra Violet filter
This means that Mayhems Ultra Pure H20 water passes through 14 different filters to achieve its goal of being the best coolant for PCs.
Benefits :
- Guaranteed High quality
- The best non-conductive liquid for PC water cooling available to the end user
- Over 99.999% of impurities removed from the water
- Long storage time if stored in a dark and cool environment away from direct sunlight at 20 ° C for up to 2 years
- Can be used with Mayhems dyes, Silver coils and Mayhems biocides
- Electrical conductivity less than 2uS or approximately 1ppm at source
- 1 liter bottles delivered with a child safety cap
- Made and produced in the UK
Special glue for gluing Lock Collars on the rigid tube.
The glue consists mainly of acrylate resin or epoxy resin. Mono-component form, the adhesive hardens under the effect of UV radiation and / or visible light.
The glue is mainly used in applications for gluing glass and various materials. For the assembly of decorative glass, optical glass or electronic glass, the glue is the solution provided for applications requiring high fixation and rapid bonding in a few seconds.
See the video below for the assembly:
http://geno.boxgods.com/Hardline_Premium_Fittings.mp4
Technical characteristics :
Volume: 8ml
Supplied with 2 fittings for easy application
Monsoon fittings are compatible only with the Rigid 10 / 13mm MONSOON and PRIMOCHILL hose, they are not compatible with the Alphacool hose.


![]() |
In stock |
![]() |
2 to 5 days delay |
![]() |
1 to 2 weeks delay |
![]() |
unknow delay |
![]() |
pre-order |
$('#basket').addClass('emptypanier');

