Alphacool ES 80mm 800-6,000rpm Fan ( 80x80x25mm) - Two Ball Bearing - PWM (JE8025B12V)

Alphacool
Alphacool
12,90 €
11,61 €
Up to 10% OFF with
COOL10 code*
In stock
In stock
Ready to ship today
Item code : 16058
EAN : 4250197248297
Non-contractual photos
* Offer valid until 17/12 midnight while stocks last and cannot be combined with any other promotion in progress.
Technical details

The Alphacool ES fans have been specially developed for use in servers and workstations and, unlike usual, do not offer a 2 or 3-pin DC power connection, but a 4-pin PWM control.

PWM control
Instead of the usual 2 cables or the 3-pin connector Alphacool now also uses a 4-pin PWM connector for enterprise fans, which is supported by more and more server mainboards. Via the 4-pin PWM connector, the fan always receives full voltage and is controlled by pulse width modulation. This allows the fan to be controlled over a much wider speed range. A considerable amount of energy can be saved whilst controlling the fans in server racks and with 0% PWM control, the fans can even be stopped completely. The fan also offers a soft start, which increases the service life of the fan and reduces the risk of injury. At speeds of several thousand revolutions per minute, no parts of the body should get between the fan blades.

Double ball bearings
Unlike classic plain bearing, Alphacool ES fans have a double ball bearing for increased service life under full load. Double ball bearings are generally regarded as the highest quality bearings in terms of durability and quality. This also ensures a high level of running smoothness in terms of minimal vibration.

Protection circuits
All Alphacool Enterprise fans have multiple protection circuits. If the fans are blocked, they automatically try to restart at reduced speed after a few seconds. Thanks to the soft start, including the emergency start function, the fan can be blocked for up to 72 hours without suffering damage. In case of wrong polarity when connecting the fan, a burn-out of the electronics for at least 5 seconds is impossible. If the fan is connected incorrectly for a short time, this is no problem.

The Alphacool ES fans for servers and workstations offer an extremely high air flow and an extremely high static pressure. They are therefore ideal for use on radiators or as particularly powerful case fans.

Technical data
Dimensions (L x W x H) 80 x 80 x 25mm
Speed 800-6000rpm
Bearing Two ball bearing
Connection 4-Pin PWM
Cable length 30cm
Operation voltage 7 - 14V
Start voltage min. 7V
Power consumption 0,66 - 0,85A (7,92 - 10,2W)
Static pressure 14,29 mm H2O
Max. air flow 130,83 m³/h
Noise 50 dB(A)
MTBF 70.000h
color black

Security features
Automatic Shutdown Automatic switch-off if the fan is blocked
Automatic restarting Restart attempt after 2-6 seconds if blocked
Damage due to blocking It is guaranteed that the fan will not be damaged if it is blocked for up to 72 hour

 


Up to 10% discount on Watercooling by entering the code COOL10 in your basket
Offer valid until 17/12 midnight while stocks last and cannot be combined with any other promotion in progress.

Special offer

25% OFF

The EK-Pro CPU WB 4677 Rack Ni + Acetal is a dedicated enterprise-grade water block with 1U chassis compatibility specifically developed for LGA 4677 Intel® Xeon processors. The core of the new CPU water block was refined to manage the growing heat dissipation of new processors and to upgrade connectivity options for server rack requirements. The new server/workstation-grade CPU water block is compatible with 1U chassis type and suitable for use in server racks.

EK-Pro

The EK-Pro CPU WB 4677 Rack Ni + Acetal water block features a total of 4 G1/8" threaded side ports for low-profile usage.

This enterprise cooling solution is built with performance, reliability, serviceability, and no compromises in mind. This water block meets these demands with top thermal performance and unparalleled connectivity, making it the perfect choice for liquid cooling high-density computing systems.

The EK-Pro CPU WB 4677 Rack Ni + Acetal water block features a precisely machined copper base (coldplate) made from the purest copper available on the market and is treated with nickel electroplating. The top is CNC machined from durable black POM Acetal, and the hold-down bracket is made of laser-cut stainless steel.

Intel® CPU socket compatibility:
- LGA 4677 
Intel

Enclosed:
- EK-Pro CPU WB 4677 Rack Ni + Acetal Water Block
- 2x EK plug G 1/8”
- EK-Loop Multi Allen Key (6mm, 8mm, 9mm)
- 1x Torx T30 Key - 1x 5mm Allen Key
- Thermal grease (1g)