 | 
|
Le waterblock EK-FC1080 GTX Ti Aorus est un waterblock hautes performances compatible GIGABYTE® AORUS GeForce® GTX 1080 Ti.
Ce waterblock refroidit directement le GPU, la RAM ainsi que les VRM.
L'eau circule directement sur les zones critiques permettant ainsi à la carte graphique de rester stable dans les overclockings élevés.
Le waterblock propose un design très haut débit mais il peut aussi être facilement utilisé dans les systèmes de refroidissement liquides en utilisant des pompes à eau les plus faibles.
Sa base est faite de cuivre électrolytique tandis que le top est fait d'acetal ou plexi de haute qualité avec une finition satinée.
L'étanchéité est réalisée par des rondelles en caoutchouc de qualité.
Des spacers en laiton sont pré-installés et permettent une installation facile et en toute sécurité.
EKWB recommande l'achat de la plaque arrière (Plaque arrière EK-FC1080 GTX Ti Aorus) qui améliore le look de vos cartes graphiques mais aussi et surtout de refroidir les VRM de manière passive.
Jusqu'à quatre waterblocks EK-FC1080 GTX Ti Aorus peuvent être reliés entre eux via EK-FC Terminal (Dual, triple ou quad), le système EK-FC Bridge & Link n'est pas compatible avec ce waterblock.
Caractéristiques Techniques :
Filetage : 1/4"
Livré sans embout
Livré avec :
- Waterblock EK-FC1080 GTX Ti Aorus
- Mécanisme de montage avec entretoises en laiton
- Pate thermique EK-TIM Ectotherm (1g)
- Pads thermiques
Le waterblock est compatible avec le NVIDIA® SLI HB bridge
EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate D-RGB - Plexi is a cutting-edge addition to the EK® Quantum Line. It is made to complement the existing EK-Quantum Vector Trinity RTX 3080/3090 water blocks and actively cool the backside of all ZOTAC® GeForce RTX™ 3080 and 3090 Trinity GPU.
For a precise compatibility match of this water block, we recommend you refer to the EK Cooling Configurator.
EK-Quantum Vector Trinity RTX 3080/3090 active backplate links the water block and the active backplate part with a new terminal, which replaces the stock terminal coming with your water block. This way the whole enclosure requires only one inlet and one outlet, removing any unneeded additional tubing and reducing clutter. It is the ultimate aesthetic and performance solution that finds your GPU sandwiched between two water blocks allowing maximum cooling.
The Vector Active Backplate directly cools the PCB hotspots that are found on the backside of the GPU core and the VRM (voltage regulation module). On the RX 3090, the VRAM located on the backside is cooled, while the RTX 3080 gets cooling for the PCB located around the front-mounted VRAM. Cooling liquid is channeled over all these critical areas.
These newly developed active backplates feature a fin array with 6 wide channels allowing for very low flow restriction. This in turn allows overall lower temperatures, while the active backplate gets more than sufficient surface area for heat transfer.
The base of the active backplate is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. The rest of the backplate is made of nickel-plated aluminum and it does not come in contact with the liquid. These Vector Active Backplates also feature acrylic terminals that match the top cover. The watertight sealing is ensured by high-quality EPDM O-rings.
The aesthetic end-piece is housing the addressable D-RGB LED strip. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header.
Enclosed:
- EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate D-RGB - Plexi
- Necessary mounting screws, nuts, and washers
- 1x Nickel plated brass plug G1/4”
- EK-Loop Multi Allen Key (6mm, 8mm, 9mm)
- Thermal pads
Technical Specification:
- Dimensions: (LxHxW) - 231x124x15mm
- D-RGB cable length: 500mm
- D-RGB LED count: 8
- D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground)
Made in Slovenia - Europe!
Facebook
Instagram
RSS News
