Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 5700 XT Taichi X8 8G OC

Alphacool
Alphacool
119,90 €
95,84 €
20% OFF
In stock
In stock
Ready to ship today
-+
Add to cart
Item code : 15215
EAN : 4250197117593
Non-contractual photos
Technical details
The Alphacool Aurora Plexi GPX Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance.  This perfectly describes the Aurora Plexi GPX Eisblock.

More Performance!
During the development of the EIsblock Aurora GPX graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. The Alphacool Eisschicht Ultra Soft Heat Conducting Pads are used which cling to the components much better than the usual commercial heat conducting pads. The pressure on the individual components is also reduced, because the pads behave similar to a heat conducting paste, but without melting. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.

New Design!
The Eisblock Aurora GPX cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX Eisblock cooler its very own unique identity.

Copper or Aluminium?
Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling.

Is There Anything Else New?
The Eisblock Aurora GPX also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX Plexi is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation.

The Alphacool Aurora GPX Plexi is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation.


Technical Details:
W x T x H: 144 x 269,5 x 25 mm
Max Working Temperature: 60 °C
Material Cooler: Nickel-Plated Copper
Material Top: Plexiglass
Threads: 4x G1/4“
Power Supply Digital RGB: 3-Pin 5V (0,5A)
Pressure Tested: 1,5 bar

Compatibility:
ASRock Radeon RX 5700 XT Taichi X 8G OC+, RX5700XT TCX 8GP, 8GB GDDR6, 2x HDMI, 4x DP (90-GA19ZZ-00UANF)
Up to 10% discount on Watercooling by entering the code COOL10 in your basket
Offer valid until 17/12 midnight while stocks last and cannot be combined with any other promotion in progress.

Special offer

10% OFF

WaterCool
HEATKILLER V EBC - Backplate for RTX 3080/3090 EVGA XC3 - Black

37,90 €
34,11 €
10% OFF

The HEATKILLER® V eBC backplate is a useful addition for the HEATKILLER® V VGA water blocks. Mounted on the backside of the graphics card, it improves the cooling performance while also granting mechanical stability. This is due to the construction out of massive black anodized aluminum. Even more, it also just looks good.

The backplate cools relevant components on the PCB’s backside, including GPU, RAM, and voltage regulation (VRM). Pre-cut thermal pads are included in the scope of delivery.

Isolating spacers on the backside of the backplate ensure easy installation.

The enclosed mounting material is optimized for usage with HEATKILLER® V water blocks. The backplate can be used with water blocks of other manufacturers. You might need to modify the mounting material, though. This is not part of the delivery scope.

Technical data:
Material: Anodized aluminum
Dimensions (L x W x H):
Weight: 150g

Compatible with:
EVGA Geforce RTX 3080/3090 XC3
Please consult the compatibility chart at http://gpu.watercool.de

Scope of delivery:
1x HEATKILLER® V eBC - Backplate for RTX 3080/3090 EVGA XC3 - Black
1x Mounting material