 | 
|
EK-FB KIT ASUS R5E-E10 is a complete liquid cooling solution for ASUS ROG Rampage V Edition 10 motherboard consisting of two separate water blocks. The water blocks directly cool Intel X99 Express southbridge (PCH) chip and power regulation (VRM / MOSFETs) module. Please note this water block cools exactly as much heat generating components as ASUS factory cooling solution. Both blocks utilize a very high flow design, allowing you to use it in loops with weaker water pumps.
The base of both water blocks is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is performed by quality rubber gaskets. Nickel plated brass screw-in standoffs are already preinstalled and allow for easy installation.
A maximum diameter of barbs/fittings on SB part of the water block kit must be 22.2mm (EK-ACF Fitting 10/16mm are the largest fittings that you can use) in order to allow the installation of the graphics card mounted with EK-FC series backplate in the first PCIe x16 slot!
Enclosed:
- 2 water blocks (MOSFET & SB)
- Mounting mechanism
- Thermal pads
- Thermal grease EK-TIM Ectotherm
EK-Quantum Scalar² DirectLink Terminal - Plexi is an acrylic terminal that replaces the stock version of the black POM acetal terminal on the EK-Quantum Vector² Strix/TUF RTX 4080 and 4090 ABP Sets. It connects the water block with the active backplate. Sleek magnetic covers can be used to conceal the terminal screws. They allow rotation of the branding when the GPU water block is inverted in the case or is being used on a vertical GPU mount. The magnetic covers are not part of the package and should be re-used from the original terminal that came with the ABP set.
The DirectLink flow solution is the first multiple-block solution to implement a conventional 4-port terminal layout, allowing serial and parallel connections from adjacent or opposing sides of the block. It was made possible by adding a machined brass insert in the terminal that diagonally links the water block directly to the active backplate inside the acetal terminal. These brass inserts are not part of the package and should be taken from the original terminal that came with your Strix/TUF RTX 4080 or 4090 ABP set.
DirectLink proves invaluable when flexibility is required for the right setup, as in the case of a distribution plate or vertical GPU mount.
This terminal is CNC-machined out of glass-like cast acrylic.
Compatibility:
- EK-Quantum Vector² Strix/TUF RTX 4080 ABP set
- EK-Quantum Vector² Strix/TUF RTX 4090 ABP set
Technical Specification:
- Ports: 4 x G1/4"
- Dimensions (L x H x W): 72 x 23 x 41mm
- Material: CNC-machined Cast Acrylic
Facebook
Instagram
RSS News
;){kind=link}