 |
| 6,90 € 6,21 € |
This extremely pure water made just for Alphacool directly from a high-grade reverse osmosis system.
Cleaned with 5 special filters (one of which is a special reverse osmosis filter) the water is absolutely free of salts, metals and contaminants which are in tap water. The treatment removes virtually any contaminants and unwanted substances in the water.
Hence the water leaves no stains when evaporating and no lime scale deposits form.
Made in Germany.
The advantages:
Virtually completely electrically non-conductive and absolutely contaminant-free (< 0,1µS/cm, approx 100 times less than in standard distilled water)
Bacteria and algae contamination is greatly suppressed
No limescale or other residues if evaporated
Without any additives: Full thermal conductivity and no interaction with other additives
Compatible with all available PC watercooling systems
PETG tubes can be bent at lower temperatures than acrylic tubes and are more flexible and easier to handle.
It is mandatory to chamfer the edges of the tubes in order to avoid damage to the joints; a chamfer of 0.5mm x 45° is required.
4 pipes with a length of 91.4cm each.
Technical characteristics :
Internal diameter: 10mm (3/8 "or 9.5mm)
External diameter: 13mm (1/2 "or 12.7mm)
Material: PETG
The hose is only compatible with 1/4 "Cap fittings For 10 / 13mm Rigid Hose PRIMOCHILL Revolver SX, MONSOON EV2 and ChainGun.
It is not compatible with Alphacool fittings.
Facebook
Instagram
RSS News
;){kind=link}