EK Water Blocks EK-XRES 100 DDC MX - Acetal

EK Water Blocks, EKWB
EK Water Blocks
This product is no longer available for sale
Item code : 12743
EAN : 3831109843024
Non-contractual photos
Technical details

EK-XRES 100 DDC MX is a reduced cost variant of EK-XRES 100 DDC reservoir. It has been designed to lower the production costs yet still offer premium hydraulic performance at the best price.

This unit is a high-performance aftermarket pump top (volute) with integrated reservoir for Laing DDC series water pumps. This top offer increased hydraulic performance (up to 15%) compared to factory top.

EK-XRES DDC MX series reservoirs come preinstalled with anti-cyclone insert. Additionally, a PU anti-vortex foam is enclosed.

The main body features two G1/4 threaded ports of which one is an inlet (in the reservoir) and one is an outlet (from the pump). EK recommends the use of EK-ACF series compression fittings.

The tube is made of a quality acrylic material, while the rest of the pump/reservoir body is made from injection molded quality ABS material.

This reservoir can be easily upgraded with longer acrylic tubes used by EK-RES X3 series reservoirs.

The top of this combo unit can be used as an inlet by adding the EK-RES X3 - Multiport TOP and an EK-RES X3 - Internal Tube with the corresponding length to your reservoir size. The Internal Tube is important to prevent the splashing sound of the coolant inside the reservoir and to prevent coolant foaming. It is recommended that the end of the internal inlet tube is submerged in coolant.

Technical data:
- Reservoir Diameter: 60mm
- Overal Height: 100mm (121mm incl. pump)
- Mounting hole pattern: 50x50mm

Enclosed:
- pump/reservoir combo unit
- screws
- Allen key
- anti-vortex polyether black foam

Made in Slovenia - EU!

Up to 10% discount on Watercooling by entering the code COOL10 in your basket
Offer valid until 17/12 midnight while stocks last and cannot be combined with any other promotion in progress.

Please choose a category

Special offer

33% OFF

Alphacool
Apex Distro Plate Y60 with D5 Apex pump

299,90 €
199,90 €
33% OFF

The Alphacool Apex Distro Plate is the visual upgrade for the Y60. It was specially designed for this case and replaces the front glass panel. A must-have for every custom water cooling system.

Apex Design
The Apex product line from Alphacool represents the highest level of perfection. First-class materials and innovative technologies guarantee a unique premium product. A core element is the chrome-plated brass G1/4" connections. In this way, Alphacool avoids the problem of possible leaks due to cracking caused by screwing the connections directly into the acrylic. The connections are in two parts, fitted with an O-ring and counter each other when installed in the acrylic.

High-quality choice of materials & brilliant lighting
Alphacool's Apex Distro Plate is made from high-quality acrylic glass. This allows a clear view of the coolant and enables brilliant illumination thanks to the built-in digitally addressable aRGB lighting. The lighting can be controlled via a digital aRGB header on the mainboard or optionally via Alphacool's Aurora Eiscontrol aRGB controller (article no.: 15360).

Easy installation
The Alphacool Apex Distro Plate Y60 replaces the front glass panel of the Y60 housing and is easy to install. It is mounted in place of the glass panel and securely fastened using the original screws. After installation, the distro plate is connected to the water cooling loop.

Note: The Apex Distro Plate Y60 is only compatible with the Y60 housing.

Attention: It is not possible to mount the Distro Plate if a 140 mm or 280 mm radiator is attached to the side.

Compatibility:
- Y60 Case

Technical data
Dimensions (L x W x H) 344,50 x 213,50 x 87,30 mm
Material acrylic
Volume approx. 300ml
Pump compatibility VPP/D5
Threads 6x G1/4" + 1x fill port and 1x drain port
Maximum working temperature 60 °C
Pressure tested 0,8 Bar
Quantity digital aRGB LEDs 11
Power digital aRGB LEDs 5V
Power connection digital aRGB LEDs 3-Pin JST + 3-Pin 5V
Weight 3000g
Color transparent

Technical data pump
Material pump synthetic material
Material pump cover aluminium
Material axle ceramics
Connections 4-Pin PWM | SATA
Rotational speed 2500 - 4500 RPM
Cable lengths 4-Pin PWM - 48cm | SATA - 48cm
Operating voltage 8-13V DC / 14W IP32
Starting voltage 12V DC
Maximum pumping head 4,25m
Maximum flow rate 340L/h
Maximum working temperature 60°C
Color black

Note on application
Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well.