 | 
|
EK-QuantumX Delta TEC EVO E2 is an evolution of the 2nd generation of cryo-cooling water block that is made in collaboration with Intel®. It is a unique cooling solution for enthusiasts who are seeking consistent system performance and ultimate overclocking on unlocked 11th and 10th Gen Intel® Core™ desktop processors. The 2nd generation brought in improvements to the design over the original, most notably an even more powerful TEC plate allowing over 50W more of cooling power. The TEC plate is soldered to the bottom of the water block that goes over the CPU, improving contact and transfer of cooling to the block and eventually the CPU.
The Delta TEC EVO E2 specifically upgrades electronics of the 2nd generation of Delta TEC, allowing for pump and fan control.
Available in limited quantity!
EK-QuantumX Delta TEC EVO E2 CPU water block has a built-in Peltier/Thermoelectric cooler plate. It is powered by Intel® Cryo Cooling Technology, a unique combination of hardware, software, and firmware designed to help unleash elite performance for gamers and overclockers.
Delta TEC water blocks are like no other. Hence, they bear the flag of special products that are ought to push the limits – the QuantumX. The water block itself features a robust all-metal design for extreme conditions with an insulation shroud that isolates the water block cold plate from the environment, impeding condensation. The cold plate is CNC-machined out of high-purity electrolytic copper, which enables high thermal performance. A large surface area, covered with 51 cooling fins, transfers the heat away from the powerful, purpose-made TEC plate.
Built upon a purpose-designed large surface flow-through cooling engine together with Intel Cryo Cooling Technology, bridging aesthetic uniformity and near-silent operations with technological advancements in thermal solutions, the EK-QuantumX Delta TEC EVO E2 is an exceptional application of cooling the CPU with sub-ambient temperatures by utilizing a Thermoelectric Cooler (TEC) plate while continuously monitoring and adjusting temperatures dynamically, achieving an ideal operating environment for sustained gaming performance.
Liquid coolers are unable to reach temperatures below ambient (room) temperature, but the EK-QuantumX Delta TEC EVO E2 is cutting-edge, as it actively cools the CPU to sub-ambient temperatures while extracting and dissipating the heat generated from the TEC plate through the traditional liquid cooling loop. While the TEC plate cools the CPU, the TEC plate itself is cooled entirely by your custom liquid loop.
The EK-QuantumX Delta TEC series products utilize an innovative two-pronged approach to mitigate thermal condensation, a byproduct that has plagued previous attempts of sub-ambient cooling. The cooler features a compact integrated insulation shroud that isolates all exposed cold surfaces from the environmental conditions inside the PC, while the Intel Cryo Cooling Technology continuously monitors and adapts to those conditions to minimize condensation risk generated by the cooling process.
The Intel Cryo Cooling Technology software download link can be found HERE.
All necessary information on the EK-QuantumX Delta TEC series coolers can be found HERE.
Warning:
|
Technical Specifications:
- Power connector: 8-pin PCI-E
- Connection with PC: internal USB 2.0
CPU socket compatibility:
- Intel LGA1200
For motherboard and CPU compatibility please consult "Is my PC compatible" below.
Enclosed:
- EK-Quantum Delta TEC EVO E2 water block
- EK-QuantumX Delta TEC EVO E2 controller
- M4 PVC Washers (4 pcs)
- Screw (4 pcs)
- Coiled Spring (4 pcs)
- Backplate (1 pcs)
- Sticker (1 pcs)
- Thumb Nut (4 pcs)
- Thermal Paste(1 pcs)
- EK-Cable 5-Pin Motherboard (F) to Micro-USB (M) 50cm (1pcs)
The EK-Quantum Magnitude is the new ultimate bespoke CPU water block from EK® that brings the highest cooling performance with the lowest possible flow restriction. The 115x version of the water block is using a specific combination of flow distribution insert, mounting pressure, and cold plate geometry tailored for the IHS and die layout of Intel® 115x socket processors.
Different from any mounting structure used by other water blocks that are usually black and mundane plates, the design accentuates an integrated X-shaped, three-dimensional frame with premium finishes that firmly cradles the main body in place while the screws are morphed into a sophisticated design detail.
Specialized manufacturing techniques were deployed to create this truly unique product. Not a single component of Magnitude was made using mass production techniques; instead, every single piece was CNC machined separately, out of a solid piece of material. This version of the water block features a nickel-plated copper cold plate with a minimalistic black top CNC machined out of durable POM acetal.
A CNC machined solid brass insert made it possible to significantly enlarge and optimize the cooling engine. Compared to previous generations of water blocks, the fin array has a 50% bigger surface area, all contained in a smaller footprint to ensure maximum compatibility even with mITX motherboards. The copper cold plate uses 0.40mm wide microchannels and 0.26mm thick microfins to maximize the thermal transfer with minimal flow restriction.
Since EK-Quantum Magnitude was engineered from the ground up for each specific socket, the 115x version features an insert that directs flow evenly over the CPU die which is used in combination with a cold plate geometry that is specific to 115x socket processors. One more feature of the Intel-based Magnitude CPU water block is the reversible insert that can accommodate easier tube routing. It allows the user to swap the inlet and outlet port, by simply rotating the brass insert piece by 180°.
The aesthetic interchangeable inner frame is also machined out of a single piece of white POM acetal which acts as a light dispersion element for addressable D-RGB LEDs. The aesthetic frame can be replaced with color-anodized aluminum variants that perfectly match EK-Quantum Torque fitting lineup or with a brass nickel-plated frame. The aesthetic interchangeable inner frames are sold separately.
Elegantly concealed under the aesthetic inner frame is a LED strip boasting the incredible 30, individually addressable D-RGB diodes that shine outward and illuminate the white frame. The addressable D-RGB is using an industry-standard 3-pin 5V digital LED connector (Pinout: +5V, Data, Blocked, Ground).
The mounting mechanism is a three-dimensional H shaped aluminum piece that makes the screws a seamless part of the water block. Strong edges and chamfers root this award-winning icon firmly among the EK-Quantum line. Did we say award-winning?
EK-Quantum Magnitude is bearing the prestigious iF Design award for its bold and different approach to the CPU water block mounting mechanism.
The cold plate of the Magnitude water block is intentionally machined into a convex shape to align with the concave shape of the CPU IHS. However, if you are interested in a flat cold plate that works perfectly with lapped CPUs or aftermarket IHSs, EK is providing a special, flat bare copper as well as nickel-plated copper cold plates that are sold separately.
The Magnitude is supplied with an additional, thicker jet plate. If the user concludes that his CPU IHS is exceptionally concave (poor thermal paste spread after mounting), the curvature of the water block cold plate can be adjusted by using this secondary jet plate. It will make the center of the contact area bow by an additional 0.1mm outwards, for it to make better contact with the IHS.
Technical specifications:
- D-RGB cable length: 50cm
- D-RGB connector standard 3-pin (+5V, D, Blocked, Ground)
CPU socket compatibility:
- Intel LGA-1150
- Intel LGA-1151
- Intel LGA-1155
- Intel LGA-1156
Enclosed:
- EK-Quantum Magnitude Water Block
- Mounting mechanism with all necessary springs, screws, and washers
- Additional jet plate - 0.6P
- EK-TIM Ectotherm (1g) Thermal Paste
- Allen (Hex) key - 2.5mm
Made in Slovenia, EU
Facebook
Instagram
RSS News
