DocMicro.com uses a minimum number of Cookies in order to guarantee an optimal user experience and to allow the production of audience statistics. More informations
This extremely strong acrylic tubing is intended for use with external 14mm rigid pipe adapters. The tube must be heated to form certain curves. For experienced users only! Acrylic is much softer than PETG. It is mandatory to chamfer the edges of ...
This extremely strong PETG tube is intended for use with adapters for external 14mm rigid pipe. The tube must be heated to form certain curves. For experienced users only! PETG is much harder than acrylic. It is mandatory to chamfer the edges of ...
This extremely strong PETG tube is intended for use with adapters for external 14mm rigid pipe. The tube must be heated to form certain curves. For experienced users only! PETG is much harder than acrylic. It is mandatory to chamfer the edges of ...
This extremely strong PETG tube is intended for use with adapters for external 14mm rigid pipe.
The tube must be heated to form certain curves. For experienced users only!
PETG is much harder than acrylic.
It is mandatory to chamfer the ed ...
EK-HD Tube is a solid type of extruded acrylic tubing intended for use with EK-HD push-in adapters and EK-HD series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only!
It is mandatory to chamfer ...
EK-Loop Hard Tube 14mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 10/14mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend. Intended to help liquid cooling beginners, but ...
XSPC PETG tubing is highly transparent and the extra thick 2mm wall thickness makes the tubing easier to bend without deforming. Each pack contains two 0.5m lengths.
High Transparancy
Outer Diameter: 14mm
Inner Diameter: 10mm
Wall Thickness: 2mm ...