Alphacool ES 1U - 19" - ServerRack - Watercooling ready

Alphacool
Alphacool
239,90 €
215,91 €
10% OFF
In stock
In stock
Ready to ship today
-+
Add to cart
Item code : 16018
EAN : 4250197135634
Non-contractual photos
Technical details

The Alphacool ES 1U ServerRack has been specifically optimised to accommodate water cooling sets that can dissipate up to 490W of waste heat in this enclosure. For this purpose, the enclosure not only offers a mounting frame for a maximum of one 7x40mm full copper radiator of the Alphacool NexXxoS series. The optionally available Alphacool ES 40 mm fans with PWM control ensure optimum cooling performance.

Drives
The 1U server rack offers mounting options for two 5.25" drives on the left and right side of the front. Each 5.25" bay offers the alternative of mounting two 3.5" drives. A holding frame for mounting up to four 2.5" drives is pre-mounted in the centre front. This holding frame can be mounted at five other positions in the enclosure.

Mainboard
For mounting an SSI-EBB mainboard, all the usual screw connection options in the classic ATX format are available. This includes all mounting holes for Mini-ITX to EE-ATX. A graphics card in PCIe or 0.8" low-profile format can also be installed via a riser cable. A corresponding panel for 0.8" cards is pre-mounted in the case.

Water cooling for 490W waste heat
With an appropriate water cooling system, up to 490W of waste heat can be dissipated in this case. Alphacool offers special water cooling sets for this purpose, which can be individually configured and are delivered to the customer pre-filled. The mounting frame for the radiator and fans can be moved within the enclosure to suit any set-up.

Please note: The case comes without I/O panel. Alphacool offers a separate set of I/O panel and cable set under item number 1021066.

Technical data
Dimensions (L x W x H) 730,75 x 478,50 x 44,45mm
Weigth (only case without common rails) 7,62 kg
Form factor 1U
Material Galvanised sheet steel
Material thickness 1,2 mm
Mainboard form factor SSI-EEB: Mini-ITX, Micro-ATX, ATX, E-ATX, EE-ATX
Fan/radiator bracket 7 x 40 mm
Color Case Grey
Color Front Black

Up to 10% discount on Watercooling by entering the code COOL10 in your basket
Offer valid until 17/12 midnight while stocks last and cannot be combined with any other promotion in progress.

Special offer

30% OFF

EK Water Blocks
EK-Pro GPU WB A100 80GB Rack - Nickel + Inox

296,90 €
207,83 €
30% OFF

EK-Pro GPU WB A100 80GB Rack - Nickel + Inox is a high-performance full-cover water block for the NVIDIA® A100 80GB PCIe data center graphics card. It was specifically engineered to make the entire GPU and water block assembly as thin as possible, effectively allowing it to consume only a single PCIe slot width-wise. The water block is equipped with a rack-style terminal, considerably reducing the assembly height and increasing the chassis compatibility. The EK-Pro Rack GPU water blocks conform to the standard Full Height Full Width (FHFW) server chassis form factor, making them a drop-in replacement for active and passive dual-slot air coolers.

EK-Pro

By spanning the entire PCB, the water block directly cools the GPU, VRAM, and VRM (voltage regulation module) as cooling liquid is channeled directly over these critical areas.

EK-Pro GPU WB A100 80GB Rack – Nickel + Inox water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means it can be used with weaker water pumps or pumps running on low-speed settings and still achieve top performance. The lowered coolant flow requirement makes it an ideal solution for multi-GPU workstations and servers. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios.

EK-Pro

The base of the block is CNC machined out of nickel-plated electrolytic copper, while the top is laser-cut out of industry-grade stainless steel. The sealing is ensured by high-quality EPDM O-Rings. The brass standoffs are already pre-installed and allow for a safe and easy installation procedure.

EK-Pro

For added stability and protection of the graphics card, the I/O plate is now an integral part of the water block top itself, which means that the block replaces the stock I/O shield and adds more sturdiness to the whole assembly. The integrated single-slot I/O plate also benefits more compact workstation and server environments, where space and PCIe slot spacing is at a premium. This design enables the card only to consume a single PCIe x16 slot, leaving the surrounding slots available for other add-in cards.

EK-Pro

The EK-Pro GPU WB A100 80GB Rack water block features a POM-machined terminal block at the back and features two G1/4” ports, enabling easy integration with EK-Pro QDC kits and manifolds for high compute density applications.

Technical specifications:

–Dimensions (L x H x W): 252.8 x 97 x 19.5 mm
– Materials: Nickel-plated copper, stainless steel, POM

Enclosed:

- EK-Pro GPU WB A100 80GB Rack - Nickel + Inox water block 
- Mounting mechanism with screw-in brass standoffs
- Necessary mounting screws, nuts, and washers
- Thermal Interface Material