 | 
|
Reservoir housed in 2 5.25 "bays allowing to attach a Laing D5 or Swiftech MCP655 or Alphacool VPP655 pump.
Easy to install, compact, and visually very appealing!
The 2-Bay Plexi Reservoir for Pump D5 - Repack Dual Laing D5 - Dual 5.25 Bay Station is designed for mounting on the front of the box. It fits in two 5.25 inch bays. The pump can be assembled individually or in a double installation. For both options, everything is included. Operation can be in series using a Y-fitting (not included) or in parallel for 2 cycles.
Anti-Cyclone:
Unlike known solutions where coolant is passed around corners and edges, micro bubbles in this type of system are not removed. Here, on the two pump inlets marked with "in" & "out", there is a filter, which eliminates the problem of mini air bubbles in the tank.
Filling:
At the front is a hollow retractable fitting which can be easily unscrewed and stretched in order to fill the tank easily. For this, pipette bottles or funnels are strongly recommended.
The Eye-catcher:
The front face remains visible after installation. It is equipped with a level indicator.
2 LEDs 3mm or 5mm left and right can be inserted.
On the top can be inserted a 10 cm neon.
Technical characteristics :
Material: acrylic / acetal, brass
Color: transparent / black / copper
Thread: 4 x 1/4 "
Dimensions (W x D x H): 172 x 148 x 84mm
Neon support 10cm
2 holes for 3mm or 5mm LED
ROHS Compliant
Delivered with :
1x Alphacool repack - Laing D5 double - double 5.25 Bay Station
4x mounting screws
Allen wrench
Supplied without fitting or plug
Supplied with a pump already installed on the tank.
Note:
Due to the wide range of housing, the tank may not fit depending on the design of the 5.25 "slots.
The copper logo is protected with a plastic film, it can be easily removed.
Facebook
Instagram
RSS News
