EK-Loop Foldable Filling Bottle is designed to make your loop filling process much easier. The telescopic tube of the filling bottle can reach even the most remote and crammed fill ports. The narrow tube does not require the user to unscrew the entire reservoir cap to fill the loop with coolant, removing the fill port plug is more than enough.
It can also be used to mix your EK-CryoFuel coolant precisely, as the EK-Loop Foldable Filling Bottle has clearly marked coolant volume inside. It contains up to 1000ml (1 liter) with the markers incrementing every 100ml up to that point. For easier visual determination where the coolant level currently is, the milky white bottle has a thin translucent strip that reveals the coolant level at a glance.
Foldable nature of this filling bottle also makes it extremely convenient to carry with you wherever you might need it, due to small dimensions it can pack in. This newly designed bottle comes with new EK-Quantum Kits as well as the new EK-Classic D-RGB kits.
Enclosed:
- 1x EK-Loop Foldable Filling Bottle (1000mL)
Temperature sound designed for any 1/4 "thread.
Install probes in multiple locations in your loop to get accurate temperature readings.
Characteristics :
- Standard 1/4 "thread.
- High quality triple strand / triple weave sheathed cable.
- Uses a 10K Ohm sensor at 25 ° C for compatibility with a wide range of peripherals.
- The body of the plug is made of solid brass.
- The probe is made of high quality stainless steel and is thermally separated from the cap body for more accurate temperature readings.
- Knurled for easy tool-free installation.
- The cable measures 50 cm
- 2-pin connector (motherboard, fan controller, etc.)
- Supplied with 2 high quality 2.4 mm thick silicone O-rings.
Delivered with :
1 1/4 "acrylic probe
1 brass fixing ring
2 joints


![]() |
In stock |
![]() |
2 to 5 days delay |
![]() |
1 to 2 weeks delay |
![]() |
unknow delay |
![]() |
pre-order |
$('#basket').addClass('emptypanier');

