 | 
|
The new RayStorm EDGE is a complete redesign of the RayStorm series that improves on the performance of our RayStorm Pro and Neo blocks.
The RayStorm EDGE is our first three layer CPU waterblock, where the jet plate covers the whole copper base plate. This gives the appearance of a nickel plated block, without the performance drop that can come with nickel plating.
Each waterblock is carefully machined from pure copper, stainless steel and high quality acrylic, while the hold down bracket is CNC machined from a solid piece of aluminium. As with all XSPC products, no aluminium is used in the coolant flow path.
The RayStorm EDGE offers outstanding performance, integrated Digital Addressable RGB lighting, and thanks to our new mounting system, it’s even easier than ever to install.
Details:
- High performance CNC copper base
- High quality acrylic top
- Solid aluminium bracket
- (Digital) 3Pin 5v aRGB Lighting
- G1/4" threads
- Compatible with most compression fittings
Supports Socket: AM4 & AM5
Supplied with mounting hardware, integrated custom aRGB strip + needle connector, and K3 thermal paste.
RGB Compatibility:
- All 3Pin 5v Addressable RGB Motherboards, Controllers and Hubs including...
- Asus AURA Sync (3Pin 5v Headers only)
- Gigabyte RGB Fusion (3Pin 5v Headers only)
- MSI Mystic Light Sync (3Pin 5v Headers only)
NOTE: Do not attempt to plug the 3Pin 5V aRGB cable into anything other than an aRGB 5V Motherboard header pin, Controller or Hub. Each aRGB strip is tested prior to shipping, user damage by misuse is not covered under warranty.
Included:
- XSPC Raystorm EDGE aRGB CPU Waterblock
- AM4 & AM5 Mounting Plate
- AM4 & AM5 Mounting Hardware
- XSPC K3 Thermal Paste
- 3Pin Needle connector for aRGB
EK-Quantum Torque 6-Pack STC 10/13 is a fitting multipack containing six EK-Torque STC fittings. These are EK's premium 10/13mm (ID/OD) soft-tube compression fittings designed for use with various flexible soft tubing types such as PVC, EPDM, Norprene, silicone or any other type of compatible flexible tube. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products.
The locking ring is compressing the tubing wall underneath the ring, and this prevents the flexible tube from being pulled off the barb of the fitting. The grooves on the outside allow for easier hand tightening. The compression ring has cutouts in the EK Quantum signature shape allowing for the colored aesthetic ring to be shown. The colored rings are available in many colors and are screwed onto the fitting before the compression locking ring. The aesthetic rings are sold separately.
The fitting barb and the compression rings are covered with a unique, high-quality satin silver finish. Both are made of CNC machined brass and the seal is made quality rubber O-rings. Satin Titanium Torque series fittings are intentionally not painted on the inside to reduce the level of possible pollutants in the loop.
The base fitting surface is smooth and has no adequate gripping surface, but the inside of the barb is socketed with an 8mm hex (Allen) key pattern. Please, be advised not to use excessive force when attaching fitting barbs using Allen Key 8mm in order to prevent damage to other liquid cooling products! We recommend using the EK-Loop Multi Allen Key (6mm, 8mm, 9mm) which is made to break if excessive force is used, thus preventing damage to more costly components of your loop.
These fittings are guaranteed to be compatible with all other EK Water Blocks liquid cooling products.
Technical data:
- Material: Brass
- Finish: Satin Silver
- Thread: G1/4" BSPP; 4.5mm male thread length
- Supported tube: 10/13mm (ID/OD)
- The outer diameter of a fitting: 20mm
- Installed height: 19mm
- Compatible soft tubing: PVC, EPDM, Norprene, silicone
Made in Europe - Slovenia!
Facebook
Instagram
RSS News
;){kind=link}